四周包有絕緣線材的细小型黃銅制鱷魚夾。
鋸齒狀下頜可以夾取較大尺寸物體，也可以夾取細電線。
位於絕缘體内的Ø 4 mm硬質插座與帶硬質絕缘套管的彈簧式Ø 4 mm插頭配合使用。

Small, slim, made of brass with all-round insulation.
Toothed jaws for wide grip with surface for fine wire.
Ø 4 mm rigid socket in insulator accepting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.

四周包有絕緣線材的细小型黃銅制鱷魚夾。
鋸齒狀下頜可以夾取較大尺寸物體，也可以夾取細電線。
位於絕缘體内的Ø 4 mm硬質插座與帶硬質絕缘套管的彈簧式Ø 4 mm插頭配合使用。

Small, slim, made of brass with all-round insulation.
Toothed jaws for wide grip with surface for fine wire.
Ø 4 mm rigid socket in insulator accepting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.

帶柔性桿和彈簧鋼絲夾的測試夾，適合與插针或不易接接觸的電線連接。
桿體帶硅膠絕缘，耐熱性好，且在低溫下也能保持高柔軟性。
把手處Ø 4 mm的硬質插座與带硬質絕缘套管的Ø 4 mm彈簧式插頭配合使用。

With flexible shaft and spring wire grabber (stainless steel) for a good contact to pins and wires in inaccessible places.
Especially suitable for measuring voltages. The shaft is silicone insulated and guarantees good heat resistance and flexibility even at low temperatures.
Ø 4 mm rigid socket in handle accepting spring-loaded Ø 4 mm plugs withrigid insulating sleeve.

帶柔性桿和彈簧鋼絲夾的測試夾，適合與插针或不易接接觸的電線連接。
桿體帶硅膠絕缘，耐熱性好，且在低溫下也能保持高柔軟性。
把手處Ø 4 mm的硬質插座與带硬質絕缘套管的Ø 4 mm彈簧式插頭配合使用。

With flexible shaft and spring wire grabber (stainless steel) for a good contact to pins and wires in inaccessible places.
Especially suitable for measuring voltages. The shaft is silicone insulated and guarantees good heat resistance and flexibility even at low temperatures.
Ø 4 mm rigid socket in handle accepting spring-loaded Ø 4 mm plugs withrigid insulating sleeve.

帶柔性桿和彈簧鋼絲夾的測試夾，適合與插针或不易接接觸的電線連接。
桿體帶硅膠絕缘，耐熱性好，且在低溫下也能保持高柔軟性。
把手處Ø 4 mm的硬質插座與带硬質絕缘套管的Ø 4 mm彈簧式插頭配合使用。

With flexible shaft and spring wire grabber (stainless steel) for a good contact to pins and wires in inaccessible places. Especially suitable for measuring voltages.
The shaft is silicone insulated and guarantees good heat resistance and flexibility even at low temperatures.
Ø 4 mm rigid socket in handle accepting spring-loaded Ø 4 mm plugs withrigid insulating sleeve.

帶椎形不鏽鋼硬針頭的測試探頭，手柄兩端進行倒角處理。
把手處Ø 4 mm的硬質插座與帶硬質絕缘套管的Ø 4 mm彈簧式插頭配合使用。配有保護蓋。

Test probe with tapered, stainless steel rigid needle. Handle guard chamfered on both sides.
Ø 4 mm rigid socket in handle accepting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.
Supplied with protective cap.

帶椎形不鏽鋼硬針頭的測試探頭，手柄兩端進行倒角處理。
把手處Ø 4 mm的硬質插座與帶硬質絕缘套管的Ø 4 mm彈簧式插頭配合使用。配有保護蓋。

Test probe with tapered, stainless steel rigid needle. Handle guard chamfered on both sides.
Ø 4 mm rigid socket in handle accepting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.
Supplied with protective cap.

带硬質錐形不銹鋼針頭的測試探頭，手柄兩端進行倒角處理。
把手處Ø 4 mm的硬質插座與带硬質絕缘套管的Ø 4 mm彈簧式插頭配合使用。配有保護蓋。

Test probe with tapered, stainless steel rigid needle and with handle guard chamfered on both sides.
Ø 4 mm rigid socket in handle accepting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.
Supplied with protective cap.

带硬質錐形不銹鋼針頭的測試探頭，手柄兩端進行倒角處理。
把手處Ø 4 mm的硬質插座與带硬質絕缘套管的Ø 4 mm彈簧式插頭配合使用。配有保護蓋。

Test probe with tapered, stainless steel rigid needle and with handle guard chamfered on both sides.
Ø 4 mm rigid socket in handle accepting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.
Supplied with protective cap.

彈簧式不銹鋼探針可輕壓回彈，特别適合應用於敏感印刷電路。
手柄兩端進行倒角處理。
把手處Ø 4 mm的硬質插座與带硬質絕缘套管的Ø 4 mm彈簧式插頭配合使用。
配有保護蓋。

Spring-loaded stainless steel needle which reacts resiliently under light pressure.
Specially suited for sensitive printed circuits.
Test probe with handle guard chamfered on both sides.
Ø 4 mm rigid socket in handle accepting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.
Supplied with protective cap.

彈簧式不銹鋼探針可輕壓回彈，特别適合應用於敏感印刷電路。
手柄兩端進行倒角處理。
把手處Ø 4 mm的硬質插座與带硬質絕缘套管的Ø 4 mm彈簧式插頭配合使用。
配有保護蓋。

Spring-loaded stainless steel needle which reacts resiliently under light pressure.
Specially suited for sensitive printed circuits.
Test probe with handle guard chamfered on both sides.
Ø 4 mm rigid socket in handle accepting spring-loaded Ø 4 mm plugs with rigid insulating sleeve.
Supplied with protective cap.

帶硬質絕緣套管，Ø 4 mm，堆疊式插頭，採用
MULTILAM技術，用於自組裝測試導線。有鍍
金和鍍鎳可供選擇。

Stackable, Ø 4 mm, with spring-loaded
MULTILAM,
for self-assembly of test leads.
With rigid insulating sleeve. Nickel-plated
and gold-plated versions available.

絕缘型硬質插座，Ø 4 mm。可對接帶有硬質絕 連接方式：扁平連接片
缘套管的Ø 4 mm弹簧式插頭。插座可以螺纹
安裝在塑料或金属等材質的面板上。

Insulated, rigid, Ø 4 mm, accepting
spring-loaded Ø 4 mm plugs with rigid insulating
sleeve. Machined brass. The socket
is screwed into pre-drilled panels of plastic,
metal, etc. Connection: Flat connecting tab.